Piling and Shoring Equipment for Sydney Sites
Our piling equipment covers a wide range of jobs, from compact rigs that work under low headroom to high-torque machines for deep, large-diameter piles. Browse the fleet below to find the rig that suits your site.
Rig Finder
Our piling and anchoring Fleet
Narrow the list by piling method or by the site problem you’re dealing with. Open any machine to see its specs and the jobs it’s been used on.
Method
Site constraint
Tamrock
Ranger 700
For anchor and soil nail holes through rock
- Ground anchors
Pile Dia.
Pile dia.
Depth
Max depth
Weight
14.3 t
View specs
Technical Specifications
- -
- -
- -
- -
- -
- Operating weight14.3 t
- -
- -
- -
- -
Suitable applications
- Anchor holes in rock
- Soil nail holes
- Rock bolt holes
Site access
MAIT
Baby Drill
For piling inside buildings and through short spaces
- Bored piles
Pile Dia.
350 to 600 mm
Depth
15 m
Weight
5.4 t
View specs
Technical Specifications
- Bored pile diameter (max)350 to 600 mm
- Bored pile depth (max)15 m
- -
- -
- -
- Operating weight5.4 t
- -
- -
- -
- -
Suitable applications
- Piling inside buildings
- Work in lifts
- Piling under low roofs
- Remote-controlled drilling
Site access
Comacchio
MC8
For anchors and micropiles where headroom runs out
- Ground anchors
Pile Dia.
Pile dia.
Depth
Max depth
Weight
8 t
View specs
Technical Specifications
- -
- -
- -
- -
- Max torque4.5 to 23 kNM
- Operating weight8 t
- -
- Engine power97kW
- -
- -
Suitable applications
- Ground anchors
- Micropiles
- Jet grouting
- Low headroom drilling
Site access
Tescar
CF3
For tight, low-headroom sites and sensitive surfaces
- Bored piles, CFA piles
Pile Dia.
800 to 1,000 mm
Depth
22 m
Weight
11 to 13 t
View specs
Technical Specifications
- Bored pile diameter (max)800 to 1,000 mm
- Bored pile depth (max)22 m
- -
- -
- Max torque35 kNm
- Operating weight11 to 13 t
- Dimensions2.2 m wide, 2.9 m high
- Engine power53.7 kW
- Headroom3.3m, super low mode
- -
Suitable applications
- Bored piles, low headroom
- Piling on finished surfaces
- Close-to-wall piling
Site access
Soiltek
S60
For piling under bridges, viaducts and low structures
- Bored piles, CFA piles
Pile Dia.
1,000 m
Depth
26 m
Weight
16 t
View specs
Technical Specifications
- Bored pile diameter (max)1,000 m
- Bored pile depth (max)26 m
- CFA pile diameter (max)600 mm
- CFA pile depth (max)11 m
- Max torque65 kNm
- Operating weight16 t
- -
- -
- Headroom5.2 m, shortest mast
- -
Suitable applications
- CFA piles under structures
- Bored piles, low headroom
- Down-the-hole drilling
- Confined parts of big sites
Site access
Soilmec
R210
For CFA and bored piles on narrow residential sites
- Bored piles, CFA piles
Pile Dia.
1,200 mm
Depth
32 m
Weight
28 t
View specs
Technical Specifications
- Bored pile diameter (max)1,200 mm
- Bored pile depth (max)32 m
- CFA pile diameter (max)750 mm
- CFA pile depth (max)15.3 m
- Max torque96 to 100 nKm
- Operating weight28 t
- -
- -
- -
- -
Suitable applications
- CFA piles in sand
- Contiguous shoring walls
- Residential foundations
- Retaining wall piles
Site access
Soilmec
SR-45
For deep basements and heavy column loads on big sites
- Bored piles, CFA piles
Pile Dia.
2,000 mm
Depth
65 m
Weight
37 to 40 t
View specs
Technical Specifications
- Bored pile diameter (max)2,000 mm
- Bored pile depth (max)65 m
- CFA pile diameter (max)1,000 mm
- CFA pile depth (max)21.5 m
- Max torque185 kNm
- Operating weight37 to 40 t
- -
- Engine power201 kW
- Headroom8.5 m, low headroom mast
- Data recordingDrilling Mate System (DMS)
Suitable applications
- Bored piles
- CFA piles
- Cased piles
Site access
Not sure which rig suits your site?
Send through your details and a few words about the project, and a member of our team will reach out to talk through your site and the right rig for the job.
Rig Selection
Matching the machine to the site
Headroom, access width and pile size decide which rig suits your site. Browse our machines by the constraint you’re working with.
Low headroom
Working under viaducts, slabs or existing buildings.
Soiltek S60 • 5.5m clearance at The Ribbon Hotel
Tescar CF3
Bauer BG 25
Tamrock TCH-700 • anchors at 2.1 m, Chatswood Chase
Narrow or confined access
Tight frontages, laneways and basements built boundary to boundary.
Soilmec SR-20 • self-erecting
Tescar CF3
Soiltek S60 • craneable
Large diameter and depth
Big column loads and deep basements.
Soilmec SR-45 • rated to 2,000 mm
Bauer BG 25 • rated to 1,900 mm
Standard bored and cfa
Commercial and multi-res foundations with room to work.
Bauer BG 15
Soilmec SR-45
Supporting Machinery
Excavators and concrete pumps
Narrow the list by piling method or by the site problem you’re dealing with. Open any machine to see its specs and the jobs it’s been used on.
Excavators
Bulk and detailed excavation
When the dig and the piling come from one contractor, there’s one program to manage and no gap between trades. We dig the bulk, build the working platform and trim pile heads for the capping beam, then carry straight on with the piles and anchors.
Our excavators run from 4.5 to 35 t, with breakers on the smaller machines for tight basement benches. At Penrith we excavated 20,000 m³ for Astina in a 12-week program, alongside CFA piling and anchors
In-house support
The team helping you
Narrow the list by piling method or by the site problem you’re dealing with. Open any machine to see its specs and the jobs it’s been used on.
In-house mechanic
Our mechanic services and repairs the rigs. A breakdown gets fixed by someone who knows the machine.
Smart data recording
The rigs log drilling parameters and pressure meter tests as they work, and your engineer gets the record.
Pile integrity testing
We integrity-test finished piles, and we design and install in line with AS 2159.
Family run, solution focused
Family expertise spanning three generations of piling, and a team that works with you to find what suits your site.
In-house surveyor
Our surveyor checks set-out and levels independently of the piling crew.
Design and construct
We design the piling and shoring as well as build it, in one design and construct contract.
Recent Projects
Machinery in action across NSW
A viaduct with 5.5 m of clearance, ground anchors under 2.1 m of headroom and 20,000 m³ of bulk excavation at Penrith. See jobs with our fleet in use.
Builders we work with
- Multiplex
- Hansen Yuncken
- John Holland
- Richard Crookes
- Seymour Whyte
- Lords Group
What piling rigs does Millent Civil Works run?
We run six piling rigs: the Soilmec SR-45 and SR-20, the Bauer BG 15 and BG 25, the Soiltek S60 and the Tescar CF3. A Tamrock TCH-700 handles ground anchors, soil nails and rock bolts.
Can your piling rigs work under low headroom?
Yes. At The Ribbon Hotel our Soiltek S60 drilled CFA piles to 11 m with 5.5 m of clearance under a viaduct. At Chatswood Chase our Tamrock TCH-700 installed ground anchors under 2.1 m of headroom. The Tescar CF3 and Bauer BG 25 also handle low-headroom work.
What is the largest pile diameter your fleet can install?
Our two biggest rigs are the Soilmec SR-45, rated to 2,000 mm diameter, and the Bauer BG 25, rated to 1,900 mm. At Kemps Creek the SR-45 put in piles from 600 to 1,500 mm diameter, up to 20 m deep. What’s achievable on your job depends on the tooling and the ground, so we check it against your geotech report.
Does Millent own its piling equipment or hire it in?
We own it all: the piling rigs, the anchor rig, the pumps and the excavators. Our mechanic maintains the lot.
Can I get a spec sheet for a specific piling rig?
Yes. Open the rig in the rig finder above and use the spec sheet button, or email sales@millentcivil.com.au and we’ll send it through.
Book a site assessment before you tender
Get an expert’s insight on your site before you tender. Send us your drawings and we’ll help you choose the right machine for the job.