Home ▸ Services ▸ Plant & Equipment ▸
Soiltek
For piling under bridges, viaducts and low structures
Max diameter
Max depth
weight
At a glance
Figures are manufacturer maximums. What’s achievable on a job depends on the tooling and the ground.
About this rig
The Soiltek S60 is the rig we use when headroom decides the job. Its mast is built in sections and can be assembled in three lengths, so the crew sets it to the clearance on the day. The shortest configuration has a minimum height of about 5.2 m.
At The Ribbon Hotel development for Multiplex, the S60 drilled CFA piles up to 11 m deep under a concrete viaduct with 5.5 m of clearance. A rig with a fixed mast could not have done that job. At Kemps Creek for Hansen Yuncken, it worked alongside the SR-45 and took the confined sections while the larger rig handled the open ground.
The S60 weighs about 16 t and develops around 65 kNm of torque. It drills bored piles, CFA and down-the-hole, and it can be craneable into sites where a larger machine cannot get in. Bored capacity is up to 1,000 mm in diameter and 26 m deep, CFA is up to 600 mm and 11 m [CONFIRM the bored figures with Len].
The limit is size. For large-diameter or very deep piles we move to the Soilmec SR-45, and for headroom below the S60’s range we use the Tescar CF3.
Why this rig
FAQs
Send through your details and a few words about the project, and a member of our team will reach out to talk through your site and the right rig for the job.
The Fleet