Comacchio MC8

Comacchio

MC8

Anchor rig

For anchors and micropiles where headroom runs out

Model name

Max diameter

Model name

Max depth

8 t

weight

Tracked anchor drilling rig working below a capping beam and bored piles, with rock exposed between them and a building above

At a glance

What the MC8 can do on your site

Technical Specifications

Figures are manufacturer maximums. What’s achievable on a job depends on the tooling and the ground.

Suitable applications

  • Ground anchors
  • Micropiles
  • Jet grouting
  • Low headroom drilling

Site access

Compact crawler with an articulating mast and optional radio control. Suits very small spaces.

About this rig

Overview

The Comacchio MC8 is a compact crawler drill that we use for ground anchors and micropiles where a larger anchor rig cannot get in. Comacchio built it for work in very small spaces, with a patented articulating mast and a wide range of movements and inclinations. It can be fitted with radio remote control, so the operator stays clear of the drill.

The MC 8D, the current version, has a 97 kW engine, rotary torque from 4.5 to 23 kNm and a feed stroke from 0.95 to 4.0 m. It also takes hydraulic drifters, so it can drill both rotary and rotary-percussive. We use it for anchor holes, micropiles and jet grouting. Jet grouting is part of its range.

At Chatswood, the MC8 drilled the temporary ground anchors into rock behind a bored pile wall. The wall held a deep excavation with neighbouring buildings directly above the cut, so the anchors carried the load and took lean out of the wall. The same crew built the piles, capping beam, shotcrete panels and anchors, which kept the sequence in one hand.

For anchors in headroom the MC8 cannot manage, or in open ground where a larger rig is faster, we use our Tamrock rig.

Transport and Set-Up

Float or semi, width, height, set-up time, assist needed.

On site

The MC8 at work

Why this rig

Key features

  • Patented articulating mast for tight spaces
  • Radio remote control option
  • Rotary and rotary-percussive drilling
  • Anchors, micropiles and jet grouting
  • Compact crawler carrier

FAQs

MC8 questions

Can the Comacchio MC8 drill both anchors and micropiles?
Yes. Comacchio designed it for anchors, micropiles and jet grouting, using rotary and rotary-percussive drilling, so one rig covers several tasks on a tight site.
Yes. At Chatswood it was listed on the job where we installed temporary ground anchors into rock behind a bored pile wall, with buildings directly above the cut.
Comacchio offers radio remote control on the MC8, which lets the operator work from a safe distance in tight spaces.

Not sure which rig suits your site?

Send through your details and a few words about the project, and a member of our team will reach out to talk through your site and the right rig for the job.

The Fleet

Other rigs in the fleet

Camera placeholder image

Tescar

CF3

For tight, low-headroom sites and sensitive surfaces

Camera placeholder image

Tamrock

Ranger 700

For anchor and soil nail holes through rock

Soil Tek S60 Piling Works Under Concrete Viaduct

Soiltek

S60

For piling under bridges, viaducts and low structures