Soilmec SR-45

Soilmec

SR-45

Piling rig

For deep basements and heavy column loads on big sites

2,000 mm

Max diameter

65 m

Max depth

37 to 40 t

weight

A Soilmec SR-45 drilling rig operating on a civil construction site with crew members managing deep foundation piling works.

At a glance

What the SR-45 can do on your site

Technical Specifications

Figures are manufacturer maximums. What’s achievable on a job depends on the tooling and the ground.

Suitable applications

  • Bored piles
  • CFA piles
  • Cased piles

Site access

Our biggest rig. It needs an open site with room for a full-size working platform.

About this rig

Overview

The Soilmec SR-45 is our large-capacity rotary rig. We send it to jobs where diameter and depth set the pile specification, such as deep basements, high-rise columns and infrastructure foundations, and where the site has open ground for the platform.

It drills bored piles up to 2,000 mm in diameter and 65 m deep, and CFA piles up to 1,000 mm in diameter and 21.5 m deep. A 185 kNm rotary head and a 201 kW engine give it the torque for rock sockets and dense ground. The low headroom mast setup works from about 8.5 m and takes diameters up to 3,000 mm, though depth in that setup is limited to around 23 m.

At Kemps Creek for Hansen Yuncken, it installed piles from 600 mm to 1,500 mm in diameter, some reaching 20 m. At Botany Rail for John Holland, it worked day and night shifts around rail shutdowns and drilled tight against overhead signage. At Shell Cove for Hutchinson Builders, it drilled 200 CFA piles socketed into rock. At Chatswood, it bored the 23-pile wall that holds the excavation.

The SR-45 needs about 8.5 m of height even in its low headroom setup, so we use the Soiltek S60 or Tescar CF3 under bridges and structures. Soilmec’s Drilling Mate System logs the drilling parameters on every pile, and our in-house surveyor checks set-out independently.

Transport and Set-Up

Contact the team to find out more detail about this machine.

On site

The SR-45 at work

Why this rig

Key features

  • 185 kNm rotary head
  • Bored piles to 2,000 mm and 65 m
  • CFA piles to 1,000 mm
  • Low headroom setup from about 8.5 m
  • Self-erecting
  • Drilling Mate System logs drilling parameters on every pile

FAQs

SR-45 questions

When would you use the SR-45 instead of a smaller rig?
When the pile specification needs more diameter or depth than a smaller rig can give, such as column piles for a high-rise or deep rock sockets, and the site has room for the working platform. At Kemps Creek it piled the open ground while our Soiltek S60 took the confined sections.
Yes. At Botany Rail for John Holland it worked day and night shifts around rail shutdowns and drilled tight against overhead signage.
Yes. At Shell Cove for Hutchinson Builders it drilled 200 CFA piles socketed into high strength rock.

Not sure which rig suits your site?

Send through your details and a few words about the project, and a member of our team will reach out to talk through your site and the right rig for the job.

The Fleet

Other rigs in the fleet

Camera placeholder image

Tescar

CF3

For tight, low-headroom sites and sensitive surfaces

Camera placeholder image

Tamrock

Ranger 700

For anchor and soil nail holes through rock

Soil Tek S60 Piling Works Under Concrete Viaduct

Soiltek

S60

For piling under bridges, viaducts and low structures