Home ▸ Services ▸ Plant & Equipment ▸
Comacchio
For anchors and micropiles where headroom runs out
Max diameter
Max depth
weight
At a glance
Figures are manufacturer maximums. What’s achievable on a job depends on the tooling and the ground.
About this rig
The Comacchio MC8 is a compact crawler drill that we use for ground anchors and micropiles where a larger anchor rig cannot get in. Comacchio built it for work in very small spaces, with a patented articulating mast and a wide range of movements and inclinations. It can be fitted with radio remote control, so the operator stays clear of the drill.
The MC 8D, the current version, has a 97 kW engine, rotary torque from 4.5 to 23 kNm and a feed stroke from 0.95 to 4.0 m. It also takes hydraulic drifters, so it can drill both rotary and rotary-percussive. We use it for anchor holes, micropiles and jet grouting. Jet grouting is part of its range.
At Chatswood, the MC8 drilled the temporary ground anchors into rock behind a bored pile wall. The wall held a deep excavation with neighbouring buildings directly above the cut, so the anchors carried the load and took lean out of the wall. The same crew built the piles, capping beam, shotcrete panels and anchors, which kept the sequence in one hand.
For anchors in headroom the MC8 cannot manage, or in open ground where a larger rig is faster, we use our Tamrock rig.
Why this rig
FAQs
Send through your details and a few words about the project, and a member of our team will reach out to talk through your site and the right rig for the job.
The Fleet