Tamrock Ranger 700

Tamrock

Ranger 700

Anchor rig

For anchor and soil nail holes through rock

Model name

Max diameter

Model name

Max depth

14.3 t

weight

Camera placeholder image

At a glance

What the Ranger 700 can do on your site

Technical Specifications

Figures are manufacturer maximums. What’s achievable on a job depends on the tooling and the ground.

Suitable applications

  • Anchor holes in rock
  • Soil nail holes
  • Rock bolt holes

Site access

Track-mounted with an enclosed cab. Needs open working space and more height than the MC8.

About this rig

Overview

The Tamrock Ranger 700 is a self-propelled, track-mounted top-hammer drill that we use for anchor holes in rock. Sandvik Tamrock built it for hole diameters from 89 to 115 mm, with a Caterpillar diesel powering both the hydraulic drill and the compressor.

On shoring jobs where the anchors are tied back into rock, it drills the anchor, soil nail and rock bolt holes. It weighs about 14 t and works from an enclosed cabin, which protects the operator from dust and noise.

It is the heavier of our two anchor rigs. For headroom-limited work, such as anchors under a podium or inside a basement, we use the Comacchio MC8. The Ranger suits open cuts where the rig can stand and drill without a ceiling over it.

Transport and Set-Up

Contact the team to find out more detail about this machine.

On site

The Ranger 700 at work

Why this rig

Key features

  • Track-mounted and self-propelled
  • Hole diameter 89 to 115 mm
  • Hydraulic top-hammer rock drill
  • Enclosed operator cabin
  • Caterpillar diesel engine

FAQs

Ranger 700 questions

Why not use the Tamrock Ranger 700 for low headroom anchors?
It is a full-size track-mounted rig with a transport height of around 3.2 to 3.6 m, so it needs open working space. For low headroom anchors we use the Comacchio MC8.
Yes. A rig of this type drills the holes for anchors, soil nails and rock bolts.

Not sure which rig suits your site?

Send through your details and a few words about the project, and a member of our team will reach out to talk through your site and the right rig for the job.

The Fleet

Other rigs in the fleet

Camera placeholder image

Tescar

CF3

For tight, low-headroom sites and sensitive surfaces

Camera placeholder image

Tamrock

Ranger 700

For anchor and soil nail holes through rock

Soil Tek S60 Piling Works Under Concrete Viaduct

Soiltek

S60

For piling under bridges, viaducts and low structures