MAIT Baby Drill

MAIT

Baby Drill

Piling rig

For piling inside buildings and through short spaces

350 to 600 mm

Max diameter

15 m

Max depth

5.4 t

weight

Camera placeholder image

At a glance

What the Baby Drill can do on your site

Technical Specifications

Figures are manufacturer maximums. What’s achievable on a job depends on the tooling and the ground.

Suitable applications

  • Piling inside buildings
  • Work in lifts
  • Piling under low roofs
  • Remote-controlled drilling

Site access

Passes through a 1 m door and works inside lifts. Fully remote controlled.

About this rig

Overview

The MAIT Baby Drill is the smallest rig in our fleet. It exists for the sites no other piling rig can enter. It passes through a door 1 m wide, can work inside a lift, and operates under low roofs.

The operator runs it by remote control from a distance, so nobody stands next to the mast and drill string in a confined space. Open hole bored piling runs from 350 to 600 mm in diameter and up to 15 m deep. At 5.4 t, it is light enough to sit on slabs and suspended floors that a larger rig would overload, though the floor loading still needs an engineer’s check.

We use it for work such as bored piles inside existing buildings, basement underpinning-style piling and piles in tight plant rooms. It cannot match the diameter or depth of the Tescar CF3 or Soiltek S60, so the choice comes down to access first and the pile specification second.

Transport and Set-Up

Contact the team to find out more detail about this machine.

On site

The Baby Drill at work

Why this rig

Key features

  • Passes through a 1 m door
  • Works inside lifts and under low roofs
  • Fully remote controlled
  • Bored piles 350 to 600 mm diameter

FAQs

Baby Drill questions

Can the MAIT Baby Drill work inside an existing building?
Yes, it is built for that. It can pass through a 1 m door and works in lifts and under low roofs. The floor loading needs an engineer’s check first.
The operator stands clear of the mast and drill string, which keeps people out of the tightest part of the work area.
When getting the rig in is the problem, such as entry through a standard door or use inside a lift. The CF3 is the larger rig, so we use it where it fits.

Not sure which rig suits your site?

Send through your details and a few words about the project, and a member of our team will reach out to talk through your site and the right rig for the job.

The Fleet

Other rigs in the fleet

Camera placeholder image

Tescar

CF3

For tight, low-headroom sites and sensitive surfaces

Camera placeholder image

Tamrock

Ranger 700

For anchor and soil nail holes through rock

Soil Tek S60 Piling Works Under Concrete Viaduct

Soiltek

S60

For piling under bridges, viaducts and low structures