Home ▸ Services ▸ Plant & Equipment ▸
Tescar
For tight, low-headroom sites and sensitive surfaces
Max diameter
Max depth
weight
At a glance
Figures are manufacturer maximums. What’s achievable on a job depends on the tooling and the ground.
About this rig
The Tescar CF3 is our lightest piling rig and the one we use when access is the constraint. It runs on rubber tracks, so it can work on finished surfaces and in spaces the rest of the fleet cannot reach, and its transport width is around 2.2 m.
The mast folds down for low headroom work. In low headroom mode the rig works under 3.96 m, and in super low headroom mode it works under 3.28 m, with shorter kelly bar sections to suit. With a 22 m locking kelly bar it reaches 22 m deep in standard mode. It drills bored piles up to 800 mm in diameter, or 1,000 mm in soft soil, with 35 kNm of torque.
That is a lot of capability for 11 to 13 t. It sits below the Soiltek S60 in size and above the MAIT Baby Drill, which gets us a matched rig for each level of restriction. We choose the CF3 when the pile specification is modest and the headroom or surface condition rules out the S60.
Where the job needs larger diameters, deeper piles or a rock socket, we use the Soilmec SR-45 on open ground or the S60 under structures.
On site
Why this rig
FAQs
Send through your details and a few words about the project, and a member of our team will reach out to talk through your site and the right rig for the job.
The Fleet