Home ▸ Services ▸ Plant & Equipment ▸
Soilmec
For CFA and bored piles on narrow residential sites
Max diameter
Max depth
weight
At a glance
Figures are manufacturer maximums. What’s achievable on a job depends on the tooling and the ground.
About this rig
The Soilmec R210 is a dual-purpose rig that drills both CFA and rotary bored piles. We use it on residential and narrow commercial sites where the platform is small and a larger rig would be overkill.
On CFA work it drills up to 750 mm in diameter and 15.3 m deep, with a rotary head of around 100 kNm. It switches to a kelly bar for bored piles, and the bored diameter and depth depend on the kelly bar fitted.
Our recent job at Wamberal on the Central Coast shows what it suits. The block was a sloping beachfront lot between neighbouring homes, and the ground was water-charged sand. An open bore slumps in sand below the water table, so we used CFA, where the auger holds the hole open until the concrete is pumped. The R210 drilled 128 CFA piles at 450 mm and 600 mm, up to 14.3 m deep, and formed a contiguous shoring wall plus the foundations for both levels. The crew started on 26 August 2026 and finished on 29 September.
For deeper or larger-diameter work we move to the Soilmec SR-45. For restricted headroom we move to the Soiltek S60 or Tescar CF3.
Why this rig
FAQs
Send through your details and a few words about the project, and a member of our team will reach out to talk through your site and the right rig for the job.
The Fleet